Need help?Do you have a question about the Gilera Fuoco 500 and is the answer not in the manual?
General| Displacement | 492.7 cc |
|---|---|
| Cooling System | Liquid cooled |
| Fuel System | Electronic injection |
| Transmission | CVT with torque server |
| Rear Brake | 240 mm disc |
| Seat Height | 780 mm |
| Fuel Tank Capacity | 12 liters |
| Wheelbase | 1, 550 mm |
| Engine Type | Single-cylinder, 4-stroke |
| Max Power | 40 hp (29.4 kW) at 7, 250 rpm |
| Rear Suspension | Double hydraulic shock absorbers |
| Front Brake | 2 x 240 mm discs |
Provides critical torque values for steering, chassis, front suspension, and other assemblies.
Outlines scheduled maintenance tasks at specified mileage intervals and time periods.
Addresses common engine problems like oil consumption, exhaust smoke, and lubrication pressure.
Covers issues like insufficient braking, brake overheating, and disc problems.
Details issues with steering hardening, play, noisy suspension, and oil leakage.
Details the location, capacity, and protected circuits for all 12 fuses.
Explains the antitheft immobiliser system, its components, and LED diagnosis.
Explains diagnostic codes for immobiliser faults and provides troubleshooting procedures.
Provides a step-by-step guide for safely removing the engine from the vehicle.
Details procedures for removing, inspecting, and refitting crankshaft components and bearings.
Covers technical specs, recommended oils, and components of the engine lubrication system.
Provides troubleshooting hints, common faults, and diagnostic procedures for injection system issues.
Explains how to reset the throttle valve position sensor (TPS) for optimal idle and fuel preparation.
Covers handlebar removal, refitting, tilt mechanism, and steering tube procedures.
Explains operation and adjustment of the geared motor and suspension locking system using diagnostic tools.
To Next Page
