Gilera Fuoco 500 - Removing the Rear Wheel

•
Make sure the frame is adequately
centred by checking with a gauge that
the lugs along the vertical axis show
the standard protrusion.
•
Check that the pointers of both tyres
are correctly aligned, as shown in the
photograph. Maximum misalignment
allowed: 4 notches
Rear
Removing the rear wheel
Before removing the rear wheel, support the vehi-
cle properly and operate the parking brake so as
to facilitate removing the wheel fixing screws.
- Remove the exhaust silencer.
- Undo the screw fixing the right shock absorber to
the clamp.
Fuoco 500 i.e. Suspensions
SUSP - 45