Specification Desc./Quantity
Plunger diameter 13.9 - 0.039 -0.057 mm
Spring free length 62.5 mm
Calibration pressure 4 bar
PRE-FILTER
Specification Desc./Quantity
Type mesh, plastic
OIL FILTER
Specification Desc./Quantity
Type Paper with pressure relief and anti-cavitation by-
pass
OIL MINIMUM PRESSURE INDICATOR LIGHT SWITCH
Specification Desc./Quantity
Calibration 0.3 - 0.6 bar
HEAD LUBRICATION CONTROL JET
Specification Desc./Quantity
Diameter 1 ± 0.05 mm *
* Tightening torque 5÷7 N·m
PISTON COOLING NOZZLE
Specification Desc./Quantity
Diameter 0.8 ± 0.05 mm
BASE VENTILATION CHECK
Specification Desc./Quantity
Device decantation chamber and metal reed valve
Engine Fuoco 500 i.e.
ENG - 94