To Next PageTo Next Page
Need help?Do you have a question about the Gilera Nexus 250 i.e. and is the answer not in the manual?
General| Brand | Gilera |
|---|---|
| Model | Nexus 250 i.e. |
| Category | Motorcycle |
| Language | English |
Identifies ignition switch, starter, throttle, brake levers, and other handlebar controls.
Explains speedometer, tachometer, warning lights, and digital display functions.
Details warning lights and high-beam indicators on the front unit.
Instructions on how to set the time and date using the clock and ODO/SET buttons.
Explains icons for service, belt, battery, fuel gauge, odometer, and consumption.
Describes service/belt icons and how to set trip odometer, mean speed, etc.
Details ignition positions (LOCK, OFF, ON) and how to lock/unlock the steering.
Operation of the turn signal switch and the horn button.
How to operate the light switch and the engine start-up button.
Function of the engine stop switch and the vehicle's anti-theft immobilizer system.
Information on master key, black key, and the importance of the code card.
Explains the flashing indicator LED and the procedure for starting the vehicle.
Step-by-step guide to programming new keys for the immobilizer system.
Instructions on how to open the fuel tank cover.
Location and use of the 12V power socket and how to open the saddle.
Locating and understanding the chassis and engine identification numbers.
How to adjust the windshield to different positions for rider comfort.
Essential checks before first ride and safe refueling procedures.
Guidance on checking tyre pressure, wear, and replacement needs.
How to adjust spring preloading for different load conditions.
Guidelines for the first 1000 km and the procedure for starting the engine.
Advice on engine stress, speed limits, and troubleshooting difficult starting.
How to turn off the engine and use the center and side stands.
Operation of the automatic transmission and precautions for clutch overheating.
Tips for safe riding, including helmet use, speed, and road conditions.
Procedure for checking engine oil level, topping up, and the oil pressure warning light.
Recommended intervals and procedure for changing engine oil and filter.
Procedure for checking and maintaining the oil level in the rear hub.
Guidance on checking tyre wear, damage, and replacement needs.
Steps for removing, refitting, and replacing the spark plug.
Instructions for removing and cleaning the air filter.
How to check and top up the coolant level in the engine's cooling system.
Procedure for checking brake fluid levels and topping up.
Accessing, checking, installing, and caring for the battery during inactivity.
How to check and maintain the electrolyte level in the battery.
Identifies the two fuse boxes and their protected circuits.
Details types, power ratings, and quantities for all vehicle bulbs.
Steps for removing the headlight assembly and adjusting the beam.
How to replace bulbs for front and rear turn signals.
Replacing bulbs for rear turn signals, license plate light, and brake light.
How to adjust the position and tightness of the rear-view mirrors.
Information on brake disc/pad wear and when to seek professional inspection.
Guidance on dealing with a flat tyre and using repair sprays.
Recommended procedures for storing the scooter and cleaning its exterior.
Troubleshooting common ignition, control unit, and engine compression issues.
Addressing issues with consumption, performance, braking, suspension, and transmission.
Diagram showing overall length, width, height, and wheelbase of the scooter.
Key specifications like length, width, wheelbase, frame, suspension, and brakes.
Details on engine capacity, bore/stroke, compression ratio, and idle speed.
Listing the tools provided with the vehicle for basic maintenance.
Safety advice regarding accessories, loads, and use of genuine parts.
A table outlining maintenance tasks at specified mileage intervals.
