EasyManua.ls Logo

Gilera Nexus 250 i.e. - Headlight Assembly and Adjustment

Gilera Nexus 250 i.e.
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power: 12V - 5W
Helmet compartment light bulb Type: Cylindrical
Quantity: 1
Power: 12V - 5W
03_27
03_28
Frontlightgroup (03_27, 03_28, 03_29, 03_30, 03_31)
To remove the rear light assembly, proceed as follows:
1. Pull the Gilera emblem off with a plain slot screwdriver.
2. Remove the front shield connection unscrewing the two screws «A».
3. Remove the two screws «B».
4. Remove the screw «C» located in the expansion tank cover compartment.
5. Remove the screw «D» located in the glove-box compartment (to the left of the
shield back plate).
6. Take the headlight assembly off its housing.
To reassemble, repeat the operation in the reverse order.
67
3 Maintenance