EasyManuals Logo

Gilera Runner 200VXR User Manual

Gilera Runner 200VXR
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
03_04
or while turning a corner, it will be necessary to take your vehicle to an Author-
ised Piaggio Service Centre.
Engine oil change (03_03, 03_04)
The engine oil and cartridge filter, "C", must be replaced after the first km, and every
6.000 km thereafter, by an Authorised Piaggio Service Centre.
The engine should be emptied by draining the oil from the drainage plug «B » of the
gauze filter on the flywheel side. In order to facilitate the oil drainage, loosen the cap/
dipstick. Since a certain quantity of oil still remains in the circuit, filling must be done
with approx. 600 ÷ 650 cm³ of oil through the cap «A». Then start up the scooter, leave
it running for a few minutes and switch it off: after about five minutes check the level
and if necessary top up without exceeding the MAX level.
The cartridge filter must be replaced every time the oil is changed. For top-ups and
changes, use new oil of the recommended type.
WARNING
RUNNING THE ENGINE WITH INSUFFICIENT LUBRICATION OR WITH INADE-
QUATE LUBRICANTS ACCELERATES THE WEAR AND TEAR OF THE MOVING
PARTS AND CAN CAUSE IRRETRIEVABLE DAMAGE.
WARNING
EXCESSIVE OIL LEVEL AT TOP-UPS CAN LEAD TO SCALE FORMATION AND
VEHICLE MALFUNCTIONING.
CAUTION
USED OILS CONTAIN SUBSTANCES HARMFUL TO THE ENVIRONMENT. FOR
OIL REPLACEMENT, CONTACT AN AUTHORISED PIAGGIO SERVICE CENTRE,
36
3 Maintenance

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gilera Runner 200VXR and is the answer not in the manual?

Gilera Runner 200VXR Specifications

General IconGeneral
BrandGilera
ModelRunner 200VXR
CategoryScooter
LanguageEnglish

Related product manuals