Return Policy
Return Procedure
In the event that it becomes necessary to return a unit to our company, the following procedure should be followed:
n Obtain return authorization. Contact our Service Department and tell us the product serial number. The number is
marked on the outside of the shipping package. Return shipments would not be accepted if the number is not
clearly visible. Please provide the model number, serial number, and a brief description of the reason for return.
n Freight policy. The customer is responsible for freight charges when equipment is shipped to our company for
service (this includes customs charges).
Preface
This manual gives detailed description to the Monitor concerning its performance, operation, and other safety
information. Please read the user manual carefully before use in order to operate this product correctly and guarantee
the safety of patient and operator.
Keep the user manual near the product for convenient and timely accessed when needed.
Following symbols represent some important facts that you have to pay special attention to:
Safety warnings indicate the severity of potential hazards.
Warning: prompting potential dangerous or unsafe operations, if not avoided, it may result in death or severe
personal injury or property damage.
Caution: prompting potential dangerous or unsafe operations, if not avoided, it may result in slight personal
injury, product failure or damage, or property damage.
Note: emphasizing important attentions, providing explanations or interpretations for better use.
NOTE:
l The user manual contains descriptions concerning all configurations, so part of the content may not suitable
for the product your purchased. If you have any doubts, please contact with us.
l Refer to the device for its date of manufacture and service life.
This manual is intended for persons who are familiar with the functioning measurements and have experience in
operating the monitoring equipment.
To Next Page
Loading...
