Gima CONTEC08A-VET - Dry Battery Installation; Using the AC Adapter

14
5.1 Dry Battery Installation
① Demount the battery cover in the direction of the arrow.
② Install "AA" dry batteries according to polarities.
③ Slide to close the battery cover.
Icon “ ”: the batteries power will exhaust.
Replace with four new batteries (the same sort) at the same time.
Turn the unit off before replacing the batteries.
Note
Dispose of the batteries according to applicable local regulations about environmental.
5.2 Using the AC Adapter
① Connect device and the AC Adapter. Insert the AC Adapter Plug into the AC Adapter Jack
on the right side of the device.
② Please insert the power plug of AC adapter into the 100V- 240V socket.
Note
①Hold and pull the Housing to remove the AC Adapter from the electrical outlet. Do not
remove by pulling on the cord.