Gima CONTEC08A-VET - Error Messages and Solutions

37
Chapter13 Error Message
Error message will be displayed in the screen if there is something wrong when measuring. The
causes and solutions are shown as follows:
Error Message
Causes
Solutions
Self-test failure
System failure
Function abnormal
Please contact us
Loose cuff
Cuff is not connected
correctly.
Correctly connect cuff (refer to Chapter 9)
Air leakage
Cuff plug fall off
Make sure the cuff plug is securely inserted
in the windpipe (refer to Chapter 9)
Air pressure error
Air pressure error
Refer to the troubleshooting
Weak signal
The pulse signal is too
weak or the cuff is loose.
Correctly connect cuff (refer to Chapter 9)
overpressure
Cuff is blocked or
squeezed
Correctly connect cuff (refer to Chapter 9)