Chapter6 Setting the Date and Time
The Electronic Sphygmomanometer stores 100 groups of measurement results at most. If the
date and time are set correctly, the date and time when measuring will be correct in the memory,
otherwise it may not be correct.The results can be uploaded to PC via USB and processed with
the PC software. If the date and time are set correctly, the date and time when measuring will be
correct in the memory, otherwise it may not be correct.
Note
Correctly use data upload function:
1. First, make sure the time is right, there are three modes of time setting:
(1)When using the Sphygmomanometer for the first time or after the Sphygmomanometer has
been placed without power supply for a certain time(more than 5 minutes), after power on, there
is a prompt of time error on the main interface, set date and time with 【UP】, 【DOWN】 and
is necessary to set date and time after turning on the device.
The Electronic Sphygmomanometer can automatically stores measurement results, date
and time.
If dry battery power exhausts or removed, the time to stop.
At the moment, please reset date and time.
To Next Page
Loading...