Gima PC-900 - 4.9.4 TEMP Setup (Optional); 4.9.5 Hemostat Setup (Optional)

34
Figure 4.15 NIBP setup screen
4.9.4 TEMP Setup (Optional)
Figure 4.16 TEMP setup screen
Screen Description:
² TEMP ALM: temperature alarm switch. This item set ON, and the user cannot adjust it.
"Hi/Lo": high and low alarm limit setting for temperature.
² "Unit": set the temperature unit, "℃"and "℉" can be optional.
² "Sensor": temperature sensor type, "KRK" and "YSI" can be selected. Please set the sensor type according to the
sensor in use, or the temperature measurement will fail or be inaccurate.
4.9.5 Hemostat Setup (Optional)
Figure 4.17 Hemostat setup screen