Gin Yeti Convertible 2 - Adjustments; Adjusting Shoulder Straps; Adjusting Lateral Straps

12
Adjustments
The Yeti Convertible harness is designed with full feature adjustments to allow you to adjust to your
harness to your individual physique and flying style. It is important to adjust it correctly to ensure you
can easily slide into the sitting position after take off. A poorly adjusted harness can adversely affect the
flying characteristics of your paraglider.
Perform adjustments before your first flight by hanging in a simulator and fine-tune the settings if
necessary during your first few flights.
Shoulder straps (1)
The optimum setting for the shoulder straps depends on the height of the pilot. Step into the harness
and stand upright, symmetrically adjust the shoulder straps until they are a snug fit, but not tight.
To tighten: pull DOWN on the BLACK webbing
To loosen: pull UP on the buckle
Lateral straps (2)
The Lateral straps can be tightened or loosened to adjust the sitting angle of the pilot.
To tighten: pull FORWARD on the BLACK webbing
To loosen: pull BACK on the buckle
2
1
2
1