14
The deployment bag and handle
The rescue container for this harness comes with its own deployment handle. The handle and inner bag
are already connected.
Be sure to check the length of the strap connecting the rescue deployment handle to the rescue inner
container. It should be long enough that the reserve can be extracted without the danger of the pins not
being pulled before the strap tightens on the reserve, but not so long that there is excessive slack that
extends the movement required for deployment.
The deployment bag of other manufacturers’ rescue systems (i.e. non-GIN rescue systems) may have
different loop positions which may cause a deployment failure. Be sure to contact your parachute dealer
or a qualified professional to check the connection, position and secure deployment, and refer to the
rescue manual for details.
WARNING: The rescue parachute inner container
of other manufacturers’ may have different
loop positions which make it impossible to
deploy the rescue correctly.
To Next Page
Loading...
