Gio Electric H1 Volt - Operating Instructions; LCD DISPLAY

15
4 Operating Instructions
4.1 LCD DISPLAY
CAUTION!
Do not plug/unplug the display when the battery is ON.
To turn on the display – long press on ON/OFF switch
To turn off the display – long press on ON/OFF switch
The display will automatically turn off if the bike is not operational for 10 min.
Walking assist mode: Turn ON the display and press and hold (-) switch, the motor will engage for a
speed of ≈4 km/h and will assist while walking with the bike. This mode is applicable only when
“walking” (pushing) the bike. DO NOT use this mode while sitting on a bike.
Battery capacity
Speed
Trip distance
Clock
Pedal assist mode
On/Off switch Φ
High mode (+)
Low mode (-)