(FIG.16)
(FIG.17)
SQUEAKY BRAKES
To adjust the front brakes:
For brakes that are adjusted too loose:
3. Adjust the tension screw on the
left hand brake lever by rotating it
counter-clockwise until the wheel
spins freely.
For brakes that are adjusted too tight:
4. Tighten the tension screw on the
left hand brake lever by rotating it
clockwise until the wheel has a
slight drag.
For Further Front Brake Adjustment
5. Locate the adjustment screw on the
front brake assembly (located
on the left of front wheel). Tighten or
loosen as necessary.(FIG.16)
For Further Rear Brake Adjustment
6. Locate the adjustment screw on the
rear brake assembly ( Located
on the left of back wheel. Tighten or
loosen as necessary.(FIG.17)
The brakes may squeak before they are broken in. This is normal and will not
affect the function or performance of the brakes. With continued use the
squeak should go away.
TIRE PRESSURE
The tire must be inflated to a maximum of 50 P.S.I. It is also recommended to
use a tube additive like Slime, available from any motorcycle shop, to avoid
inconvenient punctures.
Empty all air from the tire, prior to loosening the bolt to split the rim.
MAINTENANCE
RECOMMENDED TOOLS
To adjust and service the scooter you will need the following tools:
Allen Wrenches: 3/4/5/6 mm
10
To Next Page
Loading...
Need help?
General
