7
PRODUCT TESTING
6. Connect the leader hose with a faucet.
Tips: To prevent leakage, it is recommended to use a wrench. Make sure the
rubber washer is placed in the connector.
Check whether the water hose is leaking:
- Leaking near the faucet
- Leaking near the hose reel
Check whether the washers are in the hose connection.
If you have any of the issues mentioned above, please contact the customer service by
sending an email to contact@giraffetools.com and provide the corresponding video
and order number.
1.
2.
7. Tighten the L-shaped connector with the leader hose. Insert
this connector into the water inlet of the reel box, and press
the latch down to fix.
Tips: You can adjust the direction of the connector by lifting the latch,
turning the connector to the desired orientation, and then pressing the
latch down to secure.
Notice: Be sure to press the latch completely, otherwise the leader hose will
detach from the hose reel under high water pressure.
Your hose reel is now installed and ready to use!
To Next Page
Loading...