Giraffe AW30 - How To Use; Lock and Extend Hose; Retract and Shorten Hose; Recommended Usage

HOWTO
Lock / Extend the hose
1. Pull the hose to the desired length and stop, the hose will lock.
2. To extend the hose to a longer length, pull the hose once more and stop at the new
desired length.
Retract / Shorten the hose
1. To unlock the hose, give the hose a small tug and release the force, the hose will start
retraction.
2. To shorten the hose, let the hose retract to the new desired length, pull the hose out
a little more, and then stop.
Tips: Hose can only be locked during pulling out process, and can not be locked during retraction.
Always gently retract the hose. If this is not done with caution, the hose reel and nozzle might get
damaged. When walking backwards at a steady speed, the self-segmenting mechanism inserts the
hose and weaves neatly into the reel, to ensure that it is free from kinks and tangles.
Recommended usage
1. Before retracting the hose, turn off the faucet and squeeze the nozzle trigger to
release any additional pressure. Always retract the hose after each use.
2. There is an "STOP" indication sticker 3.28 feet before the maximum length, don't pull
the hose past this point, otherwise, the retraction mechanism will be destroyed.
Remove the hose reel from bracket
1. Clamp the end of the split pin with pointed pliers and pull out the split pin.
2. Lift the hose reel out of the bracket and store it for next use.