EasyManua.ls Logo

GIRBAU ED1250 - User Manual

GIRBAU ED1250
67 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Code No. 549758
Rev. nº 10/0418
Model
From Machine No.
ED260
ED340
ED460
ED660
ED900
ED1250
2,215,001
2,240,001
2,265,001
2,290,001
2,480,001
2,470,001
Installation Instruction Manual for
ED dryers
GIRBAU, SA
Crta de Manlleu, km. 1
08500 VIC (Barcelona) • SPAIN
National sales:
T.(+ 34) 902 300 359
comercial@girbau.es
International sales:
T.(+ 34) 938 862 219
sales@girbau.es
Service:
T.(+ 34) 902 300 357
sat@girbau.es
www.girbau.es
For USA and CANADA:
CONTINENTAL GIRBAU Inc.
2500 State Road 44
WI 54904 Oshkosh • USA
Tel. 1(920) 231-8222
info@continentalgirbau.com
www.continentalgirbau.com
EN
Installation
ED260/ED340
ED460/ED660
ED900/ED1250

Table of Contents

Other manuals for GIRBAU ED1250

Preview: Operating And Maintenance Instruction
Operating And Maintenance Instruction59 pages

Questions and Answers

  • M
    Matthew LloydAug 9, 2025
    Why is the linen still damp after using my GIRBAU ED1250?
    • J
      John BrownAug 9, 2025
      If the dried linen from your GIRBAU Dryer has a moisture level that is too high, it could be due to several reasons. First, the fabrics might have excessive residual moisture before drying, in which case you should adjust the spin process. Second, the drying time may be insufficient; try altering the program to increase the drying time. Finally, the temperature might be too low, so adjust the program to increase the temperature.
  • T
    Timothy BrockAug 15, 2025
    What to do if the burner won't ignite on my GIRBAU ED1250 Dryer (gas version)?
    • J
      Jason YoungAug 15, 2025
      If the burner of your GIRBAU Dryer (gas version) cannot be ignited, there are several potential causes. First, ensure that the manual gas flow valve is open. If it is, there might be an insufficient supply of gas. In this case, ask a Registered Installation Contractors to check the gas supply pressure and flow rate. If the problem persists, contact the Authorised Technical Services. Also, the gas ignition system may be defective or the ignition electrodes may be misplaced, in this case contact the Authorised Technical Services.
  • M
    Michael RogersAug 20, 2025
    Why is the flame too orange in my GIRBAU Dryer (gas version)?
    • R
      rlongAug 21, 2025
      If the flame in your GIRBAU Dryer (gas version) appears too orange, it could be due to a faulty air intake filter. Try cleaning the filter. Alternatively, there might be a poor air/gas mixture. Check, and if necessary correct, the position of the venturi. If the problem persists, contact the Authorised Technical Services.
  • J
    John RomeroAug 27, 2025
    Why is there poor flame spread in my GIRBAU Dryer (gas version)?
    • K
      Kelly CowanAug 27, 2025
      If you're experiencing poor flame spread in your GIRBAU Dryer (gas version), it could be due to an insufficient supply of gas. Ask a Registered Installation Contractors to check the gas supply pressure and flow rate. If the problem persists, contact the Authorised Technical Services. It could also be caused by blocked burner holes, in this case contact the Authorised Technical Services.
  • F
    fowlermonicaSep 2, 2025
    What to do if my GIRBAU ED1250 Dryer drum speed is incorrect?
    • M
      Michelle CookeSep 2, 2025
      If your GIRBAU Dryer has an incorrect drum speed, it may be due to an inverter breakdown or a fault in the drum rotation detector. In either case, contact the Authorised Technical Services.

Summary

Important Safety Instructions

General Safety Precautions

Follow basic precautions to reduce risks of fire, electric shock, or injury during appliance use.

Installation & Maintenance Safety

Operations by authorised personnel; unauthorized actions void warranty and risk damage.

General Description of the Machine

Dryer Features Overview

Gas Heating System Description

Safety & Control Elements

Covers guards, switches, microswitches, and emergency stop buttons for safe operation.

Location

General Location Requirements

Installation Area Distances

Ventilation Requirements

Minimum ventilation openings for electric and gas dryers for air exchange and safety.

Technical and Connection Details

General Technical Specifications

Electrical Connection Details

Information on electrical requirements, protection devices, connection boards, and wiring.

Gas Heating Specifications

Heating data, NOx values, gas types, and power/consumption for certified gas models.

Steam Heating Specifications

Electric Heating Specifications

Connecting the Machine

Electrical Wiring and Safety

Guidelines for electrical wiring, safety precautions, grounding, and connection procedures.

Gas Connection and Type Conversion

Safety for gas connection, pipe cleaning, shut-off valves, and gas type change process.

Exhaust Ducting Installation

Initial Start-Up of the Machine

Pre-Start Checks and Preparations

Gas Combustion Analysis

GIRBAU ED1250 Specifications

General IconGeneral
BrandGIRBAU
ModelED1250
CategoryDryer
LanguageEnglish

Related product manuals