To Next PageTo Next PageWhy is the dried linen moisture level too high in my GIRBAU ED340 Dryer?
If the dried linen has a high moisture level, it could be due to a few reasons: * There may be excessive residual moisture in the fabrics, so adjust the spin process. * The drying time may be insufficient, so alter the program to increase the drying time. * The temperature might be too low, so alter the program to increase the temperature.
What to do if the burner can not be ignited in my GIRBAU gas Dryer?
If the burner in your GIRBAU gas dryer won't ignite: * First, check if the manual gas flow valve is closed and open it. * If that's not the issue, a registered installation contractor should check the gas supply pressure and flow rate. If the problem persists, contact the Authorised Technical Services.
Why is the flame too orange in my GIRBAU gas Dryer?
An orange flame in your GIRBAU gas dryer could be caused by: * A faulty air intake filter, so clean the filter. * A poor air/gas mixture, so check, and if necessary correct, the position of the venturi. If the problem persists, contact the Authorised Technical Services.
What causes poor flame spread in my GIRBAU gas Dryer?
Poor flame spread in your GIRBAU gas dryer could be due to: * Insufficient gas supply, so ask a registered installation contractor to check the gas supply pressure and flow rate. If the problem persists, contact the Authorised Technical Services.
Why is the linen still damp after using my GIRBAU Dryer?
If the dried linen from your GIRBAU Dryer has a moisture level that is too high, it could be due to several reasons. First, the fabrics might have excessive residual moisture before drying, in which case you should adjust the spin process. Second, the drying time may be insufficient; try altering the program to increase the drying time. Finally, the temperature might be too low, so adjust the program to increase the temperature.
What to do if the burner won't ignite on my GIRBAU ED340 Dryer (gas version)?
If the burner of your GIRBAU Dryer (gas version) cannot be ignited, there are several potential causes. First, ensure that the manual gas flow valve is open. If it is, there might be an insufficient supply of gas. In this case, ask a Registered Installation Contractors to check the gas supply pressure and flow rate. If the problem persists, contact the Authorised Technical Services. Also, the gas ignition system may be defective or the ignition electrodes may be misplaced, in this case contact the Authorised Technical Services.
Why is the flame too orange in my GIRBAU ED340 Dryer (gas version)?
If the flame in your GIRBAU Dryer (gas version) appears too orange, it could be due to a faulty air intake filter. Try cleaning the filter. Alternatively, there might be a poor air/gas mixture. Check, and if necessary correct, the position of the venturi. If the problem persists, contact the Authorised Technical Services.
Why is there poor flame spread in my GIRBAU ED340 Dryer (gas version)?
If you're experiencing poor flame spread in your GIRBAU Dryer (gas version), it could be due to an insufficient supply of gas. Ask a Registered Installation Contractors to check the gas supply pressure and flow rate. If the problem persists, contact the Authorised Technical Services. It could also be caused by blocked burner holes, in this case contact the Authorised Technical Services.
What to do if my GIRBAU ED340 Dryer drum speed is incorrect?
If your GIRBAU Dryer has an incorrect drum speed, it may be due to an inverter breakdown or a fault in the drum rotation detector. In either case, contact the Authorised Technical Services.
General| Capacity | 34 kg |
|---|---|
| Drum Material | Stainless Steel |
| Reversing Drum | Yes |
| Heating Method | Electric or Gas |
| Power Supply | 380-415V |
| Cooling System | Yes |
| Programs | Multiple |
Key precautions to reduce risks of fire, electric shock, and injury during operation.
Guidelines for authorized technical services and manufacturer responsibilities.
Guidelines for premises ventilation and exhaust duct connections.
Table of machine specifications: capacity, volume, diameter, and heating types.
Details on electrical wiring, protection devices, and connection diagrams.
Heating data, NOx, gas types, and power for EC certified gas dryers.
Values for steam heating power, flow rate, pressure, and connections.
Guidelines for electrical wiring, grounding, and compliance with standards.
Precautions and steps for connecting the gas supply to the dryer.
Essential checks before starting the machine for the first time.
Procedure for analysing combustion gases and making necessary adjustments.
