GIRBAU ED900 User Manual (English)

Other manuals for GIRBAU ED900

Operating And Maintenance Instruction59 pages

Questions and Answers:

B
brittanyperryAug 9, 2025
Why is the linen still damp after using my GIRBAU ED900 Dryer?
- M
  Mark WilliamsAug 9, 2025
  If the dried linen from your GIRBAU Dryer has a moisture level that is too high, it could be due to several reasons. First, the fabrics might have excessive residual moisture before drying, in which case you should adjust the spin process. Second, the drying time may be insufficient; try altering the program to increase the drying time. Finally, the temperature might be too low, so adjust the program to increase the temperature.
J
John WilsonAug 14, 2025
What to do if the burner won't ignite on my GIRBAU Dryer (gas version)?
- A
  Angela LeonardAug 14, 2025
  If the burner of your GIRBAU Dryer (gas version) cannot be ignited, there are several potential causes. First, ensure that the manual gas flow valve is open. If it is, there might be an insufficient supply of gas. In this case, ask a Registered Installation Contractors to check the gas supply pressure and flow rate. If the problem persists, contact the Authorised Technical Services. Also, the gas ignition system may be defective or the ignition electrodes may be misplaced, in this case contact the Authorised Technical Services.
J
Jennifer MoyerAug 21, 2025
Why is the flame too orange in my GIRBAU Dryer (gas version)?
- L
  Leslie YangAug 21, 2025
  If the flame in your GIRBAU Dryer (gas version) appears too orange, it could be due to a faulty air intake filter. Try cleaning the filter. Alternatively, there might be a poor air/gas mixture. Check, and if necessary correct, the position of the venturi. If the problem persists, contact the Authorised Technical Services.
K
Karen WilsonAug 27, 2025
Why is there poor flame spread in my GIRBAU ED900 (gas version)?
- C
  cynthia83Aug 27, 2025
  If you're experiencing poor flame spread in your GIRBAU Dryer (gas version), it could be due to an insufficient supply of gas. Ask a Registered Installation Contractors to check the gas supply pressure and flow rate. If the problem persists, contact the Authorised Technical Services. It could also be caused by blocked burner holes, in this case contact the Authorised Technical Services.
R
rkirkSep 2, 2025
What to do if my GIRBAU Dryer drum speed is incorrect?
- H
  hensleyrichardSep 2, 2025
  If your GIRBAU Dryer has an incorrect drum speed, it may be due to an inverter breakdown or a fault in the drum rotation detector. In either case, contact the Authorised Technical Services.

GIRBAU ED900 Specifications

General

Drum Material	Stainless Steel
Capacity	90 kg
Heating source	Electric
Heating System	Gas Burner
Control System	Microprocessor Control
Programs	Multiple programs
Dimensions (HxWxD)	2200 x 1450 x 1800 mm