Connecting the machine 63
Code No. 549758
Rev. nº 10/0418
6. EMERGENCY STOP IN COIN-OP INSTALLATIONS
IN ACCORDANCE WITH SAFETY REQUIREMENTS FOR INDUSTRIAL MACHINERY STANDARD
(UNE-EN ISO 10472-1,5-2) AND OTHER SAFETY REQUIREMENTS, THE LAUNDRY
OWNER/MANAGER IS RESPONSIBLE FOR INSTALLING AN EMERGENCY STOP DEVICE THAT
AFFECTS ALL THE MACHINES IN THE LAUNDRY.
Device features
It should be located in a visible place, separated from all machines and easily accessible.
It should break the electrical supply for all machines.
It should be designed with a capacity to disconnect all the machines safely at the moment of maximum
consumption.
A START order is required to reconnect the whole installation after the Emergency Stop Push-button has been
unlocked.
7. STARTING A DRYING CYCLE FROM AN EXTERNAL DEVICE
VERY IMPORTANT!!!
A drying cycle should only be started by voluntary activation of an activating element designed for
this purpose.
In the case of machines connected to a remote control start-up system (e.g.: a central vending unit,
etc.), this control must be located so as to ensure that the operator may be absolutely certain that
no person is exposed to any dangerous area of the machine (warning based on Machine Directive
98/37/CE, Appendix 1).
7.1. Connecting to a central vending unit and configuring the machine
Consult the manual for INSTALLING AND CONFIGURING THE VENDING CIRCUIT part number 430731.
8. OPTIONS
8.1. AFS option (Fire prevention)
Consult the AFS System Installation and Operation Instruction Manual, part number 627307.
To Next Page
Loading...
