To Next PageTo Next PageWhy is there no hot water in my Glacier Bay Bathroom Fixtures?
The absence of hot water could be due to a couple of reasons. First, the lines might be reversed, or the cartridge could be installed upside down. In this case, rotate the cartridge 180°. Alternatively, the balance valve in the cartridge might be clogged with debris. If so, clean the bottom of the cartridge.
General| Brand | Glacier bay |
|---|---|
| Model | 1005877848 |
| Category | Kitchen & Bath Fixtures |
| Language | English |
Guides on correctly positioning the valve body and removing the plaster guard for trim installation.
Instructions for connecting hot/cold water supply lines and outlet pipes using threaded connections.
Steps for soldering hot/cold water supply lines and outlet pipes to the valve body.
How to flush the system, check for leaks, and verify proper water flow through the faucet.
Steps to install the shower arm through the flange and connect the tub spout outlet pipe.
Connecting the tub spout to the valve body using the quick connection and securing with the provided hex wrench.
