EasyManua.ls Logo

Glacier bay HD67458-1108D2 - User Manual

Glacier bay HD67458-1108D2
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
THANK YOU
INSTALLATION AND CARE GUIDE
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Model#
HD67458-1108D2
SINGLE-HANDLE PULL-DOWN
SPRAYER KITCHEN FAUCET
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this kitchen
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
9/2021 REV.01THD
SKU#
1005126669

Table of Contents

Questions and Answers

  • A
    Ashley MillerAug 3, 2025
    Why is the water pressure low in my Glacier Bay Plumbing Product?
    • S
      Sarah PerryAug 3, 2025
      If you're experiencing low water pressure with your Glacier Bay Plumbing Product, it might be due to a clogged connector underneath the deck or a clogged aerator. To resolve this, turn off the water supply and disconnect the connector or aerator. Unscrew the connector or aerator and clean it under running water. Then, screw it back on and test the water flow. If the water pressure remains low, consider replacing the connector or aerator.
  • P
    Pamela ParkerAug 7, 2025
    What to do if the aerator leaks on my Glacier bay HD67458-1108D2?
    • C
      Chris RodriguezAug 7, 2025
      If the aerator of your Glacier Bay Plumbing Product is leaking or has an inconsistent water flow, it could be due to a dirty or misfitted aerator, or a clogged cartridge. You should remove the aerator and check for debris in the aerator screens. Also, remove the cartridge and check for debris. Make sure that the aerator is correctly installed.
  • T
    Tammy McdowellAug 11, 2025
    How to fix leaks underneath the handle of Glacier Bay Plumbing Product?
    • D
      Danielle MckenzieAug 11, 2025
      Leaks underneath the handle of your Glacier Bay Plumbing Product usually mean that the bonnet nut has come loose or the o-ring on the cartridge is either dirty or damaged. You can use a wrench to retighten the bonnet nut. Also, you may need to clean or replace the o-ring.
  • E
    egonzalezAug 15, 2025
    What to do if the hose does not retract on my Glacier bay HD67458-1108D2 Plumbing Product?
    • J
      jimeneznathanAug 16, 2025
      If the hose on your Glacier Bay Plumbing Product isn't retracting, the weight might not be correctly positioned. Try reinstalling or readjusting the weight to solve this issue.
  • P
    pjacksonAug 20, 2025
    How to fix low water flow in Glacier Bay Plumbing Product?
    • P
      Patricia MorenoAug 20, 2025
      A low water flow in your Glacier Bay Plumbing Product could be caused by a dirty screen filter in the spray head. To fix this, turn off the water supply at the angle stop and unscrew the spray head from the spray hose. Clean the screen filter in the spray head under running water to remove any blockage.
  • J
    Joan RobinsonAug 25, 2025
    How to fix leaks from the hose underneath the deck of Glacier bay HD67458-1108D2 Plumbing Product?
    • P
      pottertaylorAug 25, 2025
      If you notice leaks from the hose underneath the deck of your Glacier Bay Plumbing Product, the connection between the hose and discharge tube might be loose. Try tightening this connection to stop the leaks.
  • L
    Laura HendersonAug 28, 2025
    Why is there no hot or cold water from my Glacier Bay Plumbing Product?
    • D
      Diana BurnsAug 28, 2025
      If there is no hot or cold water coming from your Glacier Bay Plumbing Product, it's possible that the water inlet hose was accidentally kinked during installation, which is now limiting the water flow. Reinstalling the water inlet hose should resolve this.

Summary

Pre-Installation

Planning Installation

Ensure all parts are present before beginning installation.

Tools and Hardware Required

Lists necessary tools and safety equipment for installation.

Package Contents

Lists all parts included in the faucet package with descriptions and quantities.

Installation

Installing the faucet assembly

Guide to correctly installing the main faucet body into the sink.

Securing the faucet assembly

Instructions for fastening the faucet assembly to the sink using the FastMount system.

Attaching the quick connector to the receiving block

Steps for connecting the spray hose to the water supply line.

Installing the weight

How to attach the counterweight to the pull-down hose.

Making the water supply connections

Details on connecting the faucet's water inlet tubes to the supply valves.

Operation

Flushing and checking for leaks

Procedure to flush lines and check for any water leaks after installation.

Removing the quick connector

Instructions on how to disconnect the quick connector for maintenance or removal.

Care and Cleaning

Troubleshooting

Service Parts

Glacier bay HD67458-1108D2 Specifications

General IconGeneral
BrandGlacier bay
ModelHD67458-1108D2
CategoryPlumbing Product
LanguageEnglish

Related product manuals