Gleamous GL5 - User Manual

Questions and Answers

S
Sally TuckerSep 8, 2025
What does error code E1 mean on a Gleamous GL5?
- S
  Stephen DavisSep 8, 2025
  If your Gleamous Water Heater shows malfunction code “E1”, this indicates a current leakage. Contact the service center for repair.
H
Heidi GardnerSep 7, 2025
Why is the sliding touch not working on my Gleamous Water Heater?
- D
  David RiveraSep 7, 2025
  If the sliding touch function on your Gleamous Water Heater isn't working, it could be that you're sliding too fast. Try slowing down the speed of your sliding touch.
E
Emily HartAug 22, 2025
What to do if the Gleamous GL5 Water Heater power indicator is not lit?
- W
  William RobertsAug 22, 2025
  If the power indicator on your Gleamous Water Heater isn't lighting up, there could be a couple of reasons. First, ensure that the power switch is turned on and check for any blown fuses or tripped breakers. If the power supply is fine, the power indicator itself might be damaged and need replacement.
P
Patricia HarrisSep 4, 2025
What to do if my Gleamous GL5 is leaking from the water inlet or outlet?
- T
  Taylor BentleySep 4, 2025
  If you notice water leaking from the inlet or outlet of your Gleamous Water Heater, it might be due to a poorly connected water pipe or a damaged rubber gasket. Try reconnecting the water pipe securely or replacing the gasket.
A
Ann BellSep 3, 2025
How to adjust the temperature if my Gleamous GL5 is too hot?
- S
  sean04Sep 3, 2025
  If the water temperature from your Gleamous Water Heater is too high, the temperature might be set too high. Try setting the temperature to your desired setting.
E
Erin NielsenSep 1, 2025
Why is the water temperature too low on my Gleamous GL5?
- D
  Danielle FernandezSep 1, 2025
  If the water temperature from your Gleamous Water Heater is too low, make sure the temperature is set to your desired setting. Additionally, decreasing the water flow can help increase the water temperature.
B
Brian MullinsAug 31, 2025
What to do if my Gleamous Water Heater has low or no water output?
- C
  Cindy McdonaldAug 31, 2025
  If your Gleamous Water Heater isn't outputting water normally, or there's no water at all, consider these possibilities: * Check that the water supply is available and the inlet valve is open. * Ensure the water inlet and outlet are correctly connected. * Verify that the water pressure is normal (higher than 2L/min). * Clean the filter mesh in the water inlet and the shower head to remove any blockages.
D
Danielle MorrisonAug 30, 2025
How to fix a Gleamous GL5 Water Heater when the power indicator is not lighting?
- M
  Melissa JonesAug 30, 2025
  If the power indicator on your Gleamous Water Heater isn't lighting up, there are a couple of things to check. First, ensure the power switch is turned on. Also, check your fuses or circuit breaker to see if they've blown or tripped. If the power indicator is damaged, consider replacing it.
J
Juan CaseyAug 29, 2025
What does malfunction code “E4” mean on a Gleamous Water Heater?
- S
  Shawn MillerAug 29, 2025
  Malfunction code “E4” on your Gleamous Water Heater indicates that the temperature of the outlet water is higher than 60 degrees. Check the cause of the high temperature.
A
Anthony GarciaAug 27, 2025
Why is my Gleamous GL5 leaking from the water inlet or outlet?
- K
  kimberly34Aug 27, 2025
  If your Gleamous Water Heater is leaking from the water inlet or outlet, it's likely that the water pipe isn't connected properly or the rubber gasket is damaged. Try reconnecting the water pipe securely, or replace the gasket if needed.