Alfalfa
Initial Combine Setup
Rotor RPM
Concave
Setting
Fan
Opening
Chaffer
Opening
Sieve
Opening
Chopper
Speed
Elevator
Boots
400 - 600 0.0” - 0.3” 3 - 6 **
0.25” -
0.925”
(6 mm -
16 mm)
0.1”
(2.5 mm)
Fast* Solid
* - If baling straw is preferred, order impeller if needed.
** - The Light Seed Kit #700959206 can be installed and used for alfalfa
seed harvest but should be removed for any other crop.
Initial Header & Header Drive Setup
• Variable speed header drive in slowest position.
• Right hand pivot drive belt positioned on large countershaft drive
sheave
Tips
• If seed is light, refer to the combine settings for Grass Seed
(Bluegrass, Bent Grass).
Additional Combine Setup
• May require additional Separator Blanking Kit #700961967. This
will block off separator grates and level out shoe distribution. Please
have your dealer contact Technical Service Support.
9
To Next Page
Loading...