GLEANER S77 - Clover; Rye

Clover
Initial Combine Setup
Rotor RPM
Concave Setting
Fan Opening Chaffer Opening Sieve Opening Chopper Speed Elevator Boots
400 - 600 0.0” - 0.3” 2 - 6 **
0.25” -
0.925”
(6 mm -
16 mm)
0.1”
(2.5 mm)
Fast* Solid
* - If baling straw is preferred, order impeller if needed.
** - The Light Seed Kit #700959206 can be installed and used for clover
seed harvest but should be removed for any other crop.
Initial Header & Header Drive Setup
• Variable speed header drive in slowest position.
• Right hand pivot drive belt positioned on large countershaft drive
sheave.
Additional Combine Setup
• May require additional Separator Blanking Kit #700961967. This
will block off separator grates and level out shoe distribution. Please
have your dealer contact Technical Service Support.
Rye
Initial Combine Setup
Rotor RPM
Concave Setting
Fan Opening Chaffer Opening Sieve Opening Chopper Speed Elevator Boots
700 0.2” 4 - 6
0.75”
(19 mm)
0.2”
(5 mm)
Fast Solid
Initial Header & Header Drive Setup
• Variable speed header drive in slowest position.
• Right hand pivot drive belt positioned on large countershaft drive
sheave.
10