Glide 4 Series User Manual

11
DRIVE CLUTCH
The drive clutch is located in the centre of each driving wheel. It is identified as a large
Black Plastic Knob.
To ENGAGE, simply turn Black Plastic Knob (drive clutch) in either direction until
you here a “click”. Turn chair on and SLOWLY move joystick forward until drive
clutch self engages.
To DISENGAGE simply pull out and 1/8
th
turn the Black Plastic Knob (drive clutch).
This will allow the chair to be free wheeled.
WARNING – Disengaging drive clutch and moving chair while on a slope may be
dangerous. Automatic electronic brakes will not function.
BRAKES
Your power chair has electronic brakes and they are activated in the flowing manner.
1. If chair suffers a power failure while driving
2. When joystick of controller is released
3. When chair is turned Off
In addition the power chair is fitted with attendant brakes for use when in free wheel
(drive clutch disengaged).
ANTI-TIP WHEELS
When anti-tip wheels are requested they are easily fitted to the rear motor mounting
tubes by way of inserting into tube and locating button lock to fit into pre-drilled hole
in motor mounting tube.
WARNING – interference with kerbs may occur when anti-tip wheels are fitted

Glide 4 Series Specifications

General

Frame Material	Aluminum
Weight Capacity	300 lbs
Rear Wheel Size	24"
Front Wheel Size	8"
Foldable	Yes
Frame Type	Folding
Footrest Style	Swing-away
Seat Width	16", 18", 20"
Seat Depth	16"
Armrest Style	Desk-length