GlideScope GVL - Page 41

GlideScope
®
System Displays, Controls, and Indicators
User’s Manual page 17
Brightness: When BRIGHTNESS is
highlighted, press UP/DOWN to
increase/decrease luminosity. A brightness
setting of 18 - 20 units is recommended.
Contrast: When CONTRAST is highlighted,
press UP/DOWN to increase/decrease image
contrast. A contrast setting of 16 - 20 units is
recommended.
Color: When COLOR is highlighted, press
UP/DOWN to increase/decrease displayed
color saturation. The default setting of 50
units (on a scale of 0 - 100 units) is
recommended.
Mirror: Press UP to display a mirror image of
the displayed image. Press DOWN to return
to the original view.
Reset: Pressing either UP or DOWN will
return all monitor settings to the factory
defaults.
Exit: When EXIT is highlighted, press either
UP or DOWN to save all settings and return
to the viewing screen.
Normal, NTSC, AV1: These three items
display the format and channel of the signal
that is being received from the GlideScope.
Since these GlideScope cameras use the
NTSC format, these settings will not change.
NOTE: VOLUME and MUTE may appear on
some monitor screens. These features are
currently inactive.