GlideScope GVL - Page 7

GlideScope, the GlideScope symbol, GVL, Verathon and the Verathon Torch symbol are trademarks of Verathon Inc. © 2008, 2010, 2011 Verathon Inc.
GlideScope video laryngoscope systems are CE marked in accordance with the Medical Device Directive, and the Verathon Inc. quality system is
Quality System Certied to ISO 13485:2003 standards.
CorporateHeadquarters:
VerathonInc.
20001 North Creek Parkway
Bothell, WA 98011, USA
Tel: 800.331.2313 (US and Canada only)
Tel: 425.867.1348 Fax: 425.883.2896
Attaching/Detaching the GlideScope
GVL or Cobalt Video Baton
Insert the GVL
®
or Cobalt video baton cable into
the port located on the face of the monitor so that
the arrows on the cable and the monitor line up.
For GVL only: Attach the opposite end of the
video cable to the port located on the GVL.
Note: When connecting and disconnecting the cable,
grasp the connector by the gray sleeve.
Insert the Cobalt video baton into the sterile,
single-use GVL Stat until it clicks into place.
Ensure proper insertion by matching the
GlideScope logo on the side of the video
baton and the GVL Stat.
Detach the video baton from the GVL Stat
by grasping the base of the video baton and
pulling rmly.
Attaching/Detaching the
GlideScope Cobalt Video Baton and Stat
verathon.com
0900-2013-07-60
Stat
IMPORTANT!A used GVL Stat is a biohazard and should be disposed
of in a manner consistent with local directives in the user’s jurisdiction.
Video
baton
M
Manufacturer:
VerathonMedical(Canada)ULC
2227 Douglas Road
Burnaby, British Columbia
Canada, V5C 5A9
P
ECRepresentative:
VerathonMedical(Europe)B.V.
Linnaeusweg 11
3401 MS IJsselstein Netherlands
Tel: +31.30.68.70.570
Fax: +31.30.68.70.512t