This document contains the proprietary information of Globalcom Engineering. Its receipt or possession does not convey any rights to
reproduce or disclose its contents or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific
written authorization of Globalcom Engineering is strictly forbidden. Mod.N:Q060R04
5.2 BV1000CL SPECIFICATIONS
Processors: BV1000CL has two processors. One is a secure processor, high performance, low
power consumption, compliant with the main security standards.
Main peripherals of the secure processor are a Memory Protection Unit (MPU), an advanced
crypto multiplier for cryptography and authentication, a true random number generator,
dedicated hardware for protection against SPA/DPA attacks and sensors to warranty the
environment protection.
The second processor is a high-performance ARM Cortex™-M4 32-bit RISC core operating at a
frequency up to 168 MHz with memory protection unit (MPU) which enhances application
security.
Contactless Chip Driver: it’s CLRC663 chip from NXP.
The CLRC663 is a highly integrated transceiver IC for contactless communication at 13.56 MHz.
This transceiver IC uses an outstanding modulation and demodulation concept completely
integrated for different kinds of contactless communication methods and protocols at 13.56 MHz.
CLRC663 is connected to cortex M4 processor on a Serial Peripheral Interface (SPI).
RS232 interfaces: the terminal has 4 serial interfaces RS232 connected on Minibridge connectors.
USB OTG Interface: this port is an USB On the Go connected to a microUSB connector.
To Next Page
Loading...