Globalsat BU-353 User Manual

README ver 2.0.doc
060102
USB GPS RECEIVER INSTALLATION GUIDE
Ver 2.0
A: Installation Steps:
1. Put the CD with drivers into CD Rom
2. Click the button of ”Install Driver” after Auto-run program being executed
3. Run the file ” PL-2303 Driver Installer.exe” in the CD directly via “ file manager” if the Auto-run program
cannot be executed.

Globalsat BU-353 Specifications

General

Chipset	SiRFstarIII
Frequency	1575.42 MHz
Interface	USB
Sensitivity	-159 dBmW
Reacquisition	0.1 s
Channels quantity	20 channels
Navigation protocols	NMEA 0183
GPS accuracy - position	5 m
Product color	Black
WAAS capability	Yes
Rechargeable	-
Operating temperature (T-T)	-40 - 80 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Weight	62.37 g

Summary

Installation Steps

Install Driver via AutoRun

Install the GPS driver by clicking 'Install Driver' on the AutoRun program.

Install Driver Manually

Manually run the PL-2303 Driver Installer.exe if AutoRun fails.

Testing GPS Receiver Operation

Using GPSinfo.exe for Verification

Verify GPS configuration and operation using the GPSinfo.exe program.

Troubleshooting GPSinfo.exe Connection

Steps to reset the device if connection errors occur in GPSinfo.exe.

LED Indicator and Un-Installation

LED Status Meanings

Explains the meaning of LED OFF, LED ON, and LED Flashing states.

Uninstall GPS Driver

Run the DRemover98_2k.exe program to uninstall the GPS driver.

Troubleshooting and Support

No GPS Response After Installation

Resolve no GPS response issues by unplugging and re-connecting the device.

Erratic Mouse Cursor in WIN2000

Fix erratic mouse cursor issues in WIN2000 related to the GPS driver.

Contacting Dealer for Support

Information to document before contacting the dealer for further assistance.