24
16. Specifications
RF Section
RF Input Range 49.5MHz~862MHz
Input Dynamic Range -20 dBmV~ +20 dBmV
IF Band width 8 MHz
RF IN 75Ω Unbalance (IEC Female)
RF OUT 75Ω Unbalance (IEC male)
Symbol Rate Range 1.9~6.9MS/S
Supporting system DVB-C (QAM) Compliant
Multi-Demodulation Selection 16 QAM, 32 QAM, 64 QAM, 128 QAM and 256 QAM
A/V Mode
Video format MPEG-II Main profile/Main level
Audio format MPEG-II layer I&II
Aspect Ratio 16:9, 4:3
Audio sampling rate 32,44.1, 48kHz
Audio Type Mono Dual Mono, Stereo, Joint stereo
Graphic display 720x576(PAL), 720x480(NTSC)
Microprocessor & Memories
Processor 200 MIPS based CPU
RAM 64Mbits
FLASH 16Mbits
Power & Environment Condition
Supply Voltage Free Voltage (100~250V AC, 50/60Hz)
Supply Power Max.30W
Physical Specification
Weight 2.0Kg
Dimensions 300(W) x 235(D) x 65(H)mm
Connection
-For Room 1 only
Cable RF input F-type (Digital)
Cable loop out 950-2150MHz
Scart TV (RGB, CVBS, YPb,Pr)
Video RCA Composite Video, (CVBS)
Audio Audio left, Audio right
Digital Audio Digital Coaxial Audio Output
-For Room 2 only
Cable RF input F-type (Digital)
Cable RF loop out 950-2150MHz
Video Composite Video
Audio Audio left, Audio right
Control Output 0/12V out
RF Modulator output UHF CH 21-69 Adjustable, F-type
& Remote sensor Input
Control Voltage 12V
RS232 9 way D Rs232 DCE serial port
Specification is subject to change without notice.
To Previous Page
Loading...
