INSTRUCTIONS FOR USE
For a correct use of the device, proceed as follows:
- Connect the cables to the outlets on the unit.
- Connect the electrodes to the connectors at the end of the cables.
- Place the electrodes on the skin.
Start up
Turn on the electrostimulator by pressing the ON/OFF/OK button for 3 seconds
until hearing a tone.
The names of the unit and of the software version appear on the right-bottom
corner of the display.
The entries of the main menu may vary according to single models.
Use the P+ and P- buttons on the keyboard to scroll the menu:
“Program List” menu
When selecting “Program List”, the following areas, according to the model, are
shown:
- SPORT
- FITNESS-PHYSICAL SHAPE
- BEAUTY-AESTETHICS
- PAIN-ANTALGIC
- REHABILITATION
Program selection
- Area selection:
Press P+ or P- to move the cursor on the desired area. Press OK to confirm.
Press the left (Back) button to return to the previous screen.
- Program selection.
- Body part selection (when available)
To Next Page
Loading...