Need help?Do you have a question about the Glorious GMMK PRO and is the answer not in the manual?
General| Layout | 75% |
|---|---|
| Backlighting | RGB |
| Connectivity | USB-C |
| Frame Material | Aluminum |
| Weight | 3.3 lbs (1.5 kg) |
| Dimensions | 332 mm x 135 mm x 32 mm |
| Mounting Style | Gasket-mounted |
| RGB | Yes |
| Operating System Compatibility | Windows, macOS, Linux |
| Switch Type | Hot-swappable (compatible with 3-pin and 5-pin switches) |
| Keycap Material | Not included (Barebone) |
Use the keycap puller tool to clamp on a keycap and pull upwards to detach.
Use the switch puller tool to push in the two tabs located on the switch and pull upwards.
Ensure switch pins are perfectly straight before inserting a new switch.
Align switch to holes on the keyboard and press gently until it pops in.
Once the switch is confirmed properly inserted, snap back the appropriate keycap.
Explains available switch plate materials like brass and polycarbonate.
Steps to replace the switch plate, starting with removing keycaps and switches.
Instructions to pull out the existing rotary knob and insert the new one.
To Next Page