EasyManua.ls Logo

Glow-worm Betacom 24a - Any Assistance; 9 Fault Finding

Glow-worm Betacom 24a
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0020105023_00-10/10-Glow-worm
- 12 -
ANYASSISTANCE?
ANY ASSISTANCE?
9 Fault Finding
Inthissectionfaultcodesthatare
displayed,whichCANbecarriedoutby
theUSERtorestoreapplianceoperation
(Correctiveaction:...).Otherfaultcodes
MUSTbesolvedbyacompetentperson
only.
i
Like all condensing boilers
it will produce a plume of
condensation from the ue
terminal in cool weather.
This is due to the high
efciency and hence low ue
gas temperature of the boiler.
It is normal and not a fault
indication.
• Ifaftercarryingoutthisbasicadvice
andyourappliancestilldoesnotwork,
leaveitturnedoffandcontactyour
competentperson.
Fault code Possible causes Solution
The
appliance
stops
working
Electricalcircuit
interrupted
Checkthatthereisnopowercutandthattheapplianceis
correctlyconnected.Whenelectricalpowercomesback
on,theapplianceautomaticallycomesbackintoservice.
Ifthefaultpersists,contactyourInstallation/Servicing
companyorGlow-wormService.
Reset
Presstheresetbutton,thenwait5secs.Shouldafaultbe
indicated,afurther2moreattemptscanbemade.
xx
Fault
Afaultisindicatedbyaashing,alternating'F'and
number.Ifthefaultpersistsafter3resetattempts,contact
yourInstallation/ServicingcompanyorGlow-worm
Service.

Lackofwaterinthe
installation
(<0.5bars)
ContactyourInstallation/ServicingcompanyorGlow-worm
Service,tohaveyoursystemchecked.
Excesswaterinthe
installation
Withcentralheatingoff,openthevent(bleedscrew)ona
radiatortoallowwatertoescapeandreducethepressure
intheheatingcircuit,orcontactyourInstallation/Servicing
companyorGlow-wormService.

Related product manuals