Glow-worm Micron 40FF User Manual

9
221899A
Diagram 4.1
4 Flue and Appliance Preparation
TOP OUTLET/REAR FLUE
TOP OUTLET/SIDE FLUE
15mm
VIEW 'B'
510mm
MAX.
15mm
52mm
VIEW 'A'
VIEW 'A'
SPIGOT
FLUE
Note: Outer casing, mounting brackets & boiler details removed for clarity
REAR OUTLET FLUE PACK
STD/EXTD. TOP OUTLET FLUE PACK
& 1 METRE EXTENSION KIT
SCREW
& TAPE
SCREW
& TAPE
SCREW
& TAPE
FOAM
SEAL
9353
1 metre extension kits
may be joined together,
but the total flue
system must not
exceed 3 metres.
44.5mm*
52mm
FLUE LENGTH
MAX 840mm (extd.)
MAX 570mm (std/Easyfit)
FLUE LENGTH
MAX 840mm (extd.)
MAX 570mm (std/Easyfit)
15mm
SCREW
& TAPE
4mm*
140mm*
TOP OUTLET FLUE PACK
Note: Outer casing, mounting brackets &
boiler details removed for clarity
Note: Outer casing, mounting brackets & boiler details removed for clarity
'X'
STD/EXTD
'X' plus 19mm (RH)
155mm (LH) = flue length
VIEW 'B'
15mm
Total must not exceed 3m MAX.
SCREW
& TAPE
SCREW
& TAPE
STD/EXTD SIDE FLUE
'X' plus 19mm (RH)
155mm (LH) = flue length
EASYFIT
'X' plus 47mm (RH)
'X' plus 183mm (LH) = flue length
STD/EXTD REAR FLUE
'Y' plus 22.5mm = flue length
EASYFIT
'Y' plus 50.5mm = flue length
'Y'
'X'
'Y' plus 67mm
= flue length
'Y'
STD/EXTD
'Y' plus 22.5mm
= flue length
EASYFIT
'Y' plus 50.5mm
= flue length
'Y'
15mm
52mm
'Y' plus 67mm = flue length
'Y'
SCREW
& TAPE
Total must not exceed 2m MAX.
SCREW
& TAPE
STD. REAR OUTLET FLUE PACK
& 1 METRE EXTENSION KIT
FOAM
SEAL
1 metre extension kits may be
joined together, but the total
flue system must not
exceed 2 metres.
EASYFIT
'X' plus 47mm (RH)
(must include 50mm min.
side clearance)
'X' plus 183mm (LH) = flue length
*STD/EXTD flue only
TOP STD/
EASYFIT
REAR
SIDE R.H.
SIDE L.H.
TOP EXTD.
REAR
SIDE R.H.
SIDE L.H.
REAR STD.
REAR 75 142 510 443 -
MINIMUM
WALL
THICKNESS
MINIMUM
FLUE
LENGTH
MAXIMUM
FLUE
LENGTH
"Y"
BOILER MOUNTING FACE
TO EXTERNAL WALL FACE
"X"
BOILER CASING TO
EXTERNAL WALL FACE
MAXIMUM DISTANCE FROM
97
96
232
547
-
-
-
551
415
75
75
75
75
75
75
97
96
232
840
840
840
817
-
-
-
821
685
570
570
570
FLUE
PACKS
NOTE :
IF IT IS NECESSARY TO CUT THE DUCTS
TO ACHIEVE THE "FLUE LENGTH" MAKE SURE
THAT THE OVERLAPS ARE AS FOLLOWS :-
THE OVERLAP FOR AIR DUCT = 25mm
THE OVERLAP FOR FLUE DUCT = 50mm
9354

Glow-worm Micron 40FF Specifications

General

Brand	Glow-worm
Model	Micron 40FF
Category	Boiler
Language	English