GLP JUNIOR SCAN 2 - Maintenance and Cleaning the JUNIOR SCAN 2; Safety Regulations; Mirror and Optical System; Air Cooling System

JUNIIF
-eLp-
7 Maintenance
and Cleaning
the
JUNIOR
SCAN 2
It is
absolutely
essential
that
the fixture
is kept clean and
that dust,
dirt and smoke-fluid
residues
must not built up on
or
within the fixture. Otherwise
the
fixture's
light-output will
be
significantly
reduced.
Regular
cleaning
will not only ensure
the maximum
light-
output,
but will also allow the
fixture to function
reliably throughout
its life.
A
soft
lint-free cloth moistened
with any
good glass
cleaning
fluid is recom-
mended, under
no circumstances should
alcohol or solvents
be used!
The inside optical system
should be
maintained
only by authorized
persons.
Please
contact
your
local dealer.
7.1 Safety
Regulations
o
Pull out
the main
plug!
o
Wait
at
least
20 minutes after the
last operation to cool
down the
fixture.
.
Before
you
put
the
JUNIOR
SCAN
2
into
operation close
the casing,
otherwise
your
retina can be
hurt!
7.2 Mirror and Optical System
Clean
the
mirror
and
the optical system
of the
JUNIOR SCAN
2
with water and
some
glass
detergent.
To
clean
the inner side
of the
lens, it
can
be screwed
out completely.
7.3 Air Cooling System
Clean
the
fans,
air
channels and
grills
regularly.
Attention:
Do not cover
the
air
inlets
!!!
13
GLP
r
German
Light Production