GM BLAZE - Operating the Ramp and Access

4
CITROEN BERLINGO BLAZE | OPERATING THE RAMP AND ACCESS
1. Ensure there is sufficient access space behind the
vehicle to open the tailgate and operate the ramp.
2. Position one hand on the handle on the side of the
ramp and the other on the red strap. Pull the strap
towards you to release the ramp securing latch.
(Fig 1.)
3. Using the two grab handles unfold the ramp until it
sits flat and is touching the floor. (Fig 2.)
4. Closing is the reverse procedure. Simply lift with
the handles, fold and push the ramp until it clicks
into place.
2.
1.
PULL THE STRAP
TOWARDS YOU TO
RELEASE THE LATCH
USE BOTH HANDLES
TO LOWER THE RAMP
TO THE FLOOR