EasyManua.ls Logo

GMC 1994 Yukon - Page 145

GMC 1994 Yukon
386 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The air
flow
can be blended between the two positions. To blend between
positions press the side
of
the
button showing
the
area where
you
would like
more air flow. The system will automatically begin to blend toward the
position chosen. To stop the system between positions, just press the
SAME
side
of
the button again.
Right Button
Defrost
(Top)
:
This setting operates the defroster. Air comes
out
near the
bottom
of
the
windshield and at your front side windows. Use this setting,
along with
a
heat setting, when you get fog or
ice
on
the windshield.
Heater (Bottom)
:
Press
the
bottom
of
this button and air comes
out
near
the floor. This setting, along with
a
heat setting, is best for passenger
comfort
in
cold weather.
The air flow can be blended between the two positions.
To
blend between
positions press
the
side of
the
button showing the area where
you
would like
more air flow. The system will automatically begin to blend toward the
position chosen.
To
stop the system between positions, just press the
SAME
side of the button again.
A/C
Button
Press the button marked
A/C
to
turn your air conditioner on and off.
The
A/C
symbol
will
light on your display and air
will
come
out
of
your
instrument panel vents. The fan will automatically be set
on
LOW
.
When you press the
A/C
button to turn the air conditioner
off,
the
system
will operate
in
the vent mode. When you turn the air conditioner back
on,
the system will operate
in
the mode that you last selected unless the
OFF
button
was
pressed.
MAX
Button
If
you
press
the
MAX
button, the air
in
your vehicle will be recirculated.
With the air conditioner
on,
MAX
will give you
maximum cooling.
It can
also
be used in
all
modes to help keep dust out of your vehicle. When
MAX
is selected,
REC
will light
on
your display.
If your air conditioner develops high system pressure, it will automatically
go into the
MAX
mode and
REC
will light on your display.
The
A/C
system will remain
in
the
MAX
mode, even
if
you press
the
MAX
button,
until system pressure returns
to
a
normal
level.
3-7

Table of Contents

Related product manuals