GMC 2011 Terrain - Page 210

Black plate (52,1)
GMC Terrain Owner Manual - 2011
7-52 Infotainment System
5. The system prompts for a name
for the phone. This name will be
used to indicate which phone is
connected. The system confirms
the name.
6. The system responds with
“<Phone name> has been
successfully paired” after the
pairing process is complete.
7. Repeat Steps 1 through 7 for
additional phones to be paired.
Listing All Paired and Connected
Phones
1. Press
b / g .
.
For vehicles without a
navigation system, the
system responds “Ready,”
followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
“Hands Free.” The system
responds “Ready,” followed
by a tone.
2. Say “Bluetooth.” The system
responds “Bluetooth ready,”
followed by a tone.
3. Say “List.” The system lists
all paired Bluetooth devices.
The system will respond “is
connected” if a phone is
connected to the vehicle.
Deleting a Paired Phone
1. Press
b / g .
.
For vehicles without a
navigation system, the
system responds “Ready,”
followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
“Hands Free.” The system
responds “Ready,” followed
by a tone.
2. Say “Bluetooth.” The system
responds “Bluetooth ready,”
followed by a tone.
3. Say “Delete.” The system asks
which phone to delete followed
by a tone.
4. Say the name of the phone to
be deleted. If the phone name
is unknown, use the “List”
command for a list of all paired
phones. The system responds
“Would you like to delete <phone
name>? Yes or No,” followed by
a tone.
5. Say “Yes” to delete the phone.
The system responds “OK,
deleting <phone name>.”
Linking to a Different Phone
1. Press
b / g .
.
For vehicles without a
navigation system, the
system responds “Ready,”
followed by a tone.