In Brief 1-5
Remote Vehicle Start
With this feature the engine can be
started from outside of the vehicle.
Starting the Vehicle
1. Press and release Q on
the Remote Keyless Entry
transmitter.
2. Press and hold
/ for about
two seconds. The turn signal
lamps will briefly flash to confirm
the vehicle has been started.
The parking lamps will turn on
and remain on as long as the
engine is running. The vehicle's
doors will be locked.
3. The key must be inserted and
turned to ON/RUN before
driving.
The engine will shut off after
10 minutes unless a time extension
is done or the key is inserted and
turned to ON/RUN.
Canceling a Remote Start
To cancel a remote start, do one of
the following:
.
Press / until the parking lamps
turn off.
.
Turn on the hazard warning
flashers.
.
Insert the key and turn it to
ON/RUN and then back to
LOCK/OFF.
See Remote Vehicle Start on
page 2‑5.
Door Locks
To lock or unlock the vehicle from
the outside, press
Q or K on the
Remote Keyless Entry (RKE)
transmitter.
There is a power door lock switch
on the instrument panel.
To Next Page
Loading...
Need help?
General
