Vehicle Care 10-47
Tire Sidewall Labeling
Useful information about a
tire is molded into its sidewall.
The examples show a typical
passenger vehicle tire and a
compact spare tire sidewall.
Passenger (P‐Metric) Tire Example
(A) Tire Size: The tire size
is a combination of letters
and numbers used to define a
particular tire's width, height,
aspect ratio, construction type,
and service description. See the
“Tire Size” illustratio n later in this
section for more detail.
(B) TPC Spec (Tire
Performance Criteria
Specification)
: Original
equipment tires designed to
GM's specific tire performa nce
criteria have a TPC specification
code molded onto the sidewall.
GM's TPC specifications meet
or exceed all federal safety
guidelines.
(C) DOT (Department
of Transport ation)
: The
Department of Transportation
(DOT) code indicates that
the tire is in compliance
with the U.S. Department
of Transportation Motor
Vehicle Safety Standards.
(D) Tire Identification
Number (TIN)
: The letters
and numbers following the DOT
(Department of Transporta tion)
code are the Tire Identification
Number (TIN). The TIN shows
the manufacture r and plant
code, tire size, and date the tire
was manufactured. The TIN is
molded onto both sides of the
tire, although only one side may
have the date of manufacture.
(E) Tire Ply Material
: The type
of cord and number of plies in
the sidewall and under the tread.
(F) Uniform Tire Quality
Grading (UTQG)
: Tire
manufacturers are required
to grade tires based on three
performance factors: treadwear,
traction, and temperatur e
resistance. For more information
see Uniform Tire Quality
Grading on page 10‑63.
To Next Page
Loading...
Need help?
General
