7-8 Infotainment System
English and Metric Unit
Conversion
To change the display units
between English and metric units,
see Driver Information Center (DIC)
on page 5‑23 for more information.
Cleaning the Display
Notice: Using abrasive cleaners
when cleaning glass surfaces
could scratch the glass. Use only
a soft cloth and do not spray
cleaner directly on the system
as it could affect the mechanical
parts.
Do not wipe the panel with a hard
cloth or use a volatile liquid such as
paint thinner; it could scratch the
surface or erase the characters on
the buttons.
Radio
AM-FM Radio
Playing the Radio
Audio Source
VOL/
O (Power/Volume):
1. Press to turn the radio on or off.
2. Turn to increase or decrease
the volume of the active source
(i.e., current audio source, active
navigation voice guidance,
or traffic prompts).
The steering wheel controls can
also be used to adjust the volume.
See “Steering Wheel Controls” in
the vehicle owner manual for more
information.
To access the radio main page,
press the SOURCE button on the
faceplate, the Now Playing screen
button, or one of the audio screen
buttons on the Home Page.
While on the audio main page,
press the Source button repeatedly
to display and cycle through the
available sources (AM, FM, and
XM (if equipped), CD, USB/iPod,
and AUX).
Infotainment System Menus
Tone Settings
To access the tone settings, press
the Home Page Tone button or the
TONE button on the faceplate.
Use the tone settings to adjust the
following features:
.
Setting the tone
.
Adjusting the speakers
Setting the Tone
To adjust the tone:
.
Treble: Press + or − to change
the level.
.
Middle (Midrange): Press + or −
to change the level.
.
Bass: Press + or − to change
the level.
To Next Page
Loading...
Need help?
General
