9-52 Driving and Operating
When the vehicle crosses a
detected lane marking, the LDW
indicator will flash and three beeps
will sound. LDW will not warn if
the turn signal is on or if a sharp
maneuver is made.
How the System Works
The LDW camera sensor is on the
windshield ahead of the rearview
mirror.
To turn LDW on and off, press
the LANE DEPART control on the
steering wheel. The control indicator
will light when LDW is on.
When the vehicle is started, the
LDW indicator on the instrument
panel will come on briefly.
LDW operates at speeds of 56 km
(35 mph) or greater. If LDW is on,
the LDW indicator will appear green
if the system detects a left or right
lane marking. This indicator will
change to amber, flash, and three
beeps will sound if the vehicle
crosses a detected lane marking
without using the turn signal.
To change the volume of the
warning chime, see “Chime Volume”
under Vehicle Personalization on
page 5‑33 for more information.
When the System Does Not
Seem To Work Properly
If the LDW symbol does not appear:
.
The lane markings on the road
may not be seen.
.
The camera sensor may be
blocked by dirt, snow or ice.
.
The windshield may be
damaged.
.
The weather may be limiting
visibility.
This is normal operation; the vehicle
does not need service. Clean the
windshield.
To Next Page
Loading...
Need help?
General
