10-62 Vehicle Care
GM recommends replacing
all the tires at the same time.
Uniform tread depth on all
tires will help to maintain
the performance of the
vehicle. Braking and handling
performance may be adversely
affected if all the tires are not
replaced at the same time. See
Tire Inspection on page 10‑59
and Tire Rotation on page 10‑59
for information on proper tire
rotation.
{
WARNING
Tires could explode during
improper service. Attempting
to mount or dismount a tire
could cause injury or death.
Only your dealer or authorized
tire service center should
mount or dismount the tires.
{
WARNING
Mixing tires of different sizes,
brands, or types may cause
loss of control of the vehicle,
resulting in a crash or other
vehicle damage. Use the
correct size, brand, and type
of tires on all wheels.
{
WARNING
Using bias-ply tires on the
vehicle may cause the wheel
rim flanges to develop cracks
after many miles of driving.
A tire and/or wheel could fail
suddenly and cause a crash.
Use only radial-ply tires with
the wheels on the vehicle.
If the vehicle tires must be
replaced with a tire that does
not have a TPC Spec number,
make sure they are the same
size, load range, speed rating,
and construction (radial) as the
original tires.
Vehicles that have a tire
pressure monitoring system
could give an inaccurate
low‐pressure warning if non‐TPC
Spec rated tires are installed.
See Tire Pressure Monitor
System on page 10‑54.
The Tire and Loading
Information label indicates
the original equipment tires on
the vehicle. See Vehicle Load
Limits on page 9‑18 for the label
location and more information
about the Tire and Loading
Information label.
To Next Page
Loading...
Need help?
General
