Keys, Doors, and Windows 2-11
Choose the power liftgate mode
by turning the dial on the switch
until the indicator lines up with the
desired position. The vehicle must
be in P (Park).
The three modes are:
MAX: The liftgate power opens to
the full open height.
3/4: The liftgate power opens
to a reduced open height that
can be set by the vehicle operator.
Use this setting to prevent the
liftgate from opening into overhead
obstructions such as a garage door
or roof mounted cargo during power
operation. The liftgate can still be
fully opened manually.
OFF: The liftgate only operates
manually in this position.
Manual operation of a liftgate that
also has power operation requires
more effort than a standard manual
liftgate.
In either the MAX or the 3/4 mode,
the liftgate can be power opened
and closed by:
.
First pressing K and then
pressing and holding
V on
the Remote Keyless Entry (RKE)
transmitter until the liftgate starts
moving. See Remote Keyless
Entry (RKE) System Operation
on page 2‑3.
.
Pressing the power liftgate
button in the center of the mode
switch on the overhead console,
with the driver door unlocked.
.
Pressing the touchpad switch
on the liftgate outside handle,
with all doors unlocked, to open
the liftgate.
To Next Page
Loading...
Need help?
General
