16 Infotainment System
Radio
AM-FM Radio
Playing the Radio
PUSH/O (Power/Volume):
.
Press to turn the radio on or off.
.
Turn to increase or decrease the
volume of the active source.
The steering wheel controls can
also be used to adjust the volume.
See Steering Wheel Controls on
page 8.
Audio Source
To access AM, FM, or SiriusXM (if
equipped), do one of the following:
.
On one of the Home Pages,
press the AM, FM, or XM (if
equipped) screen button.
.
Press the SRCE radio button to
scroll through the options.
A source ribbon will appear at
the bottom of the screen
allowing you to select the one
you want.
.
Use voice recognition by
pressing one of the voice
recognition buttons. After the
voice prompt and the beep, say
one of the following: “Tune AM,”
“Tune FM,” or “Tune XM,” or
“AM,” “FM,” or “XM”.
Infotainment System Settings
Tone Settings
To access the tone settings, press
the Tone button on the Home Page,
or press the PUSH/SEL knob while
in an audio source.
To adjust the settings:
.
Bass: Press + or − to change
the level.
.
Middle: Press + or − to change
the level.
.
Treble: Press + or − to change
the level.
.
EQ (Equalizer) (If Equipped):
Press
o or p to scroll through
the preset EQ options.
.
Stereo/Surround/DSP Mode (If
Equipped): Press
o or p to
scroll through the preset Digital
Signal Processing (DSP) or
toggle between Stereo and
Surround (5.1 DVD only) modes.
.
Fade: Press the F button to fade
the audio to the front speakers.
Press the R button to fade the
audio to the rear speakers. The
middle position balances the
sound between the front and
rear speakers.
.
Balance: Press the L button to
balance the audio to the left
speakers. Press the R button to
balance the audio to the right
speakers. The middle position
balances the sound between the
left and right speakers.
To Next Page
Loading...
