4-33
To engage a PTO while in mobile variable mode:
1. Select the desired drive gear. Do not hold the brake
or clutch pedal down.
2. The PTO Enable and cruise control (if equipped)
switch must be in ON.
3. Press the accelerator pedal to the desired
engine speed.
4. Engine speed is controlled by the turn
signal/multifunctional lever.
A. The SET position holds the engine speed selected
by the accelerator pedal.
B. With the optional cruise control:
RESUME/ACCEL increases engine speed by
25 rpm. SET/COAST decreases engine speed
by 25 rpm.
C. Without the optional cruise control: PTO UP
increases engine speed by 25 rpm. PTO DOWN
decreases engine speed by 25 rpm.
The PTO engine speed controls will become inoperative
when any of the conditions are changed, the brake or
clutch pedal is pressed or the switch is turned off.
For more information regarding the PTO settings please
see your GM dealer for assistance.
To Next Page
Loading...
