5-12
Towing the Vehicle with the Front Bumper Removed
1. Remove the front bumper.
2. Connect and lock the lift chains to the front axle,
outside of the spring anchor plates as shown.
A. Spring Anchor Plate
B. Lift Chain
C. Front Axle
3. Place a 6″ x 6″ x 5
i
hardwood beam underneath and
slightly behind the front spring shackle brackets.
4. Connect lift chains to the tow bar and raise the tow
bar until lift chain slack has been taken up and the
hardwood beam is fully seated against the spring
shackle brackets as shown.
A. Shackle Bracket
B. Tow Bar
C. Lift Chain
D. Hardwood Beam
5. Raise the vehicle to the required height.
To Next Page
Loading...
