3-2 Seats and Restraints
Head Restraints
The vehicle's front and rear seats
have head restraints in all outboard
seating positions.
{
WARNING
With head restraints that are not
installed and adjusted properly,
there is a greater chance that
occupants will suffer a neck/
spinal injury in a crash. Do not
drive until the head restraints for
all occupants are installed and
adjusted properly.
Adjust the head restraint so that
the top of the restraint is at the
same height as the top of the
occupant's head. This position
reduces the chance of a neck injury
in a crash.
1. Pull the head restraint up to
raise it. To lower the head
restraint, press the release
button, located on the head
restraint post on the top of the
seatback, while you push the
head restraint down.
2. Push down on the head
restraint after the button is
released to make sure that
it is locked in place.
The vehicle's rear seat head
restraints are not adjustable.
The head restraints not designed
to be removed.